8 Ways To Troubleshoot Your Furnace For Repairs

There is nothing worse than your furnace breaking down in the middle of the winter. You’ll be stuck in the freezing cold, struggling to find a professional to help you. But before you hit the panic button, there are a few things you can do to make sure that your furnace can be fixed right then and there.

8 Ways To Troubleshoot Your Furnace For Repairs

1) Check the Thermostat

In many cases, people freeze themselves because they haven’t checked the thermostat of their furnace. A lot of homeowners find that because they haven’t switched their thermostat that they’re getting cold air instead of hot. You don’t want to call for furnace repair in Calgary, only for the professional to turn the dial back. You should also check if your thermostat is working as it should be. Test the temperature changes, and if you notice it isn’t working, it could be damaged, as the connection isn’t working.

2) Check the Filter

If your filter is clogged up, chances are not only will your furnace not be working as it should be, but you’ll also be pushing out dirty air into your home. By changing the filter, you can get clean, hot air into your home. It’s best to get a professional to take a look at the filter and change it for you.

3) Check the Switches

If the breaker of your furnace has been tripped or has blown its fuse, it is the reason that your furnace isn’t working as it should. You just have to get it replaced.

4) Clear Out the Ducts & Vents

A lot of the time, the ducts and vents of the furnace are clogged up, unable to let any hot air pass through. It’s why people should get it cleaned out before the start of winter. Take a look down the ducts, and if it is blocked, get professional help.

5) Make Sure There is Power to the Furnace

If you have an electric furnace, you should always make sure that power is connecting. In some cases, the circuit breaker might have been tripped. All you have to do is reset it by turning the circuit all the way off and then on again. If it doesn’t work, then you might need either furnace or electrical repairs in Calgary.

6) Make Sure the Gas is Connected to the Furnace

For gas furnaces, there could have been issues with the connection to the gas line. A quick check can see if the connection has been shut off. If you think that it is not working, call your gas company and ask them if they did anything to it.

7) Check if the Gas valve on the furnace

If the gas company is doing as it should be doing (supplying your home with gas), then double-check if the handle of the valve is in line with the pipe. Turn it up if it is not. However, if you smell gas, call a furnace repair company in Calgary immediately.

8) Check the Ignition Source or Pilot Light

If you have a modern furnace, chances are you going to have an igniter coupled with a flame sensor rather than a pilot light. If you are having problems with your furnace delivering the heat required, it could be because of the ignition source. It is one of the most common furnace repairs in Calgary. If you have an older model, you will most likely have a pilot light in your unit. If the pilot light is out, try relighting it according to your owner’s manual. If you’re not comfortable with it, call an expert to help you.

Get Proactive With Furnace Repairs in Calgary

If you suspect that there are major problems with your furnace, call a professional to help you immediately. In some cases, troubleshooting will provide you with no answer to your furnace’s problems, or it does, but you don’t know how to make the repairs. However, that shouldn’t deter you from calling in an expert. You don’t want to leave your furnace in a bad state; you’ll end up searching for furnace installation in Calgary to replace it before too long.

With winter coming thick and fast, you must look towards maintaining and repairing your furnace. Taking proactive measures will ensure that your furnace is running without problems throughout the coldest months of the year. Get it inspected today!

Since 1996, ProStar Plumbing & Heating has been providing Calgary with reliable, hassle-free, quality plumbing solutions. When things go wrong, the community trusts us to handle it with our skills, expertise and personal attention. We can help you with a range of plumbing and heating services, including water leak detection and repairs, drain cleaning, sewer repair, furnace repair and much more. With 24/7 emergency service, no overtime charges, upfront pricing and the best team in the business, you know we’re for you. Whether you need your drain cleared or furnace installation in Calgary, contact ProStar today on 403-250-7232.